Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

DASH3 / ReflashingTheDASH3

Re-flashing the DASH3


PLEASE DO NOT ATTEMPT TO REFLASH YOUR DASH3 UNLESS YOU ARE ABSOLUTELY CONFIDENT IN THE REQUIRED PROCEDURE AND HAVE READ THE REFLASHING INSTRUCTIONS IN FULL.

Re-flashing is the process of updating the DASH3 firmware (program that is responsible for controlling the operation of the DASH3).

Firmware can be re-flashed to take advantage of any software changes or new features introduced. New firmware upgrades will be introduced from time to time as new features are implemented. Firmware files will be available for download and installation from the Race Technology website.

Please note that it is not routinely necessary to re-flash products from Race Technology, it should only be carried out for one of the following reasons:

  • There has been a new release of the firmware containing new features you wish to make use of.
  • When you try to connect the data logger to the software you get a message saying that your firmware is out of date.
  • There is a problem with the data logger and after contacting the factory, you've been asked to reflash the logger.

Both Configuration and Re-flashing can be done either through a connection to a Race Technology data logger or through serial connection to a PC (i.e. Using the configuration software).

Page last modified on July 09, 2009, at 06:46 AM