Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

OperatingTheDASH3 / ViewFirmwareInformation

View Firmware Version Information (5.1/5.2 Show firmware/bootloader version)

In certain cases it might be necessary to find out the firmware version that’s currently on the DASH3. Functionality for this purpose can be found under menu item 5 Firmware Control by following the steps given below;

1. Enter menu display mode by pressing the MENU button.

2. Use the UP/DOWN buttons and navigate to 5 Firmware Control in the main menu. Press SELECT button to enter into Firmware Control sub-menu.

3. Then use the UP/DOWN buttons to navigate to menu item 5.1 Show firmware version or 5.2 Show bootloader version depending on whether you need to look at the firmware version or bootloader version.

4. When press SELECT button the screen will display the currently used firmware/bootloader version.

Page last modified on October 08, 2008, at 02:35 PM