Can the RT Analysis software produce something similar to the MoTeC Rainbow map?
It's a great one-page summary, with min/max speeds, gear selection, lat-G etc.

Car 10 is a user defined vehicle constant (data/vehicel options/last page) it is used here only for the orientation of the DL1/DL2 in the car, relative to the steering wheel pot. So since I have no easy way to measure if the DL1's orientation is a few degrees from perpendicular to the longitudinal ...

At the moment, no, at least it doesn't work on my PC. Installing 7 disables 6 and vice versa. I'll check and see if that will change, although I suppose it becomes less of a nuisance as 6 fades out. Ok, let me ask it another way. Is there anything in V6 (anything, since I haven't explored every opt...

Was this resolved in the released version of V7 ?

Applejack wrote:It doesn't look like it. If V7 is installed, you'll get an error when you try and open V6.

Well lets hope *that* gets fixed

Can the release version of V.7 be installed alongside of V.6, without upsetting the operation of V.6.
I remember there were some issues with some of the later Beta versions.

Here's what I ended up with: (IF(VAR_07<30,0,SIGN(VAR_04)*((CAR_5*VAR_04/SQR(VAR_07*0.44704))- SIGN((VAR_18*0.01745)*VAR_04)*(VAR_18*0.01745)))) I had to add some value conversion, since the original MoTeC formula had 'Corrected Speed' in both km/h and m/s units. And 'Steered Angle' used Radians not...

So was a VDO 5 Bar pressure/resistance table ever located ?

RT (IF(VAR_07<50,0,SIGN(VAR_04)*( (CAR_5*VAR_04/SQR(VAR_07)) -CAR_10*((VAR_32/90)*1.571)))/1.571)*90 With Var07=Speed, Var04=Lat G and Var_32=Steering in degrees and the Oversteer units is deg. Setup Car5 as wheelbase in Meters and smooth over .2 sec. RT does not have the Stat_mean function so Car1...