Have a look on my website m Make sure that the CAN + on the S80 goes to the + input wire on the CAN harness, and CAN - goes to the - input wire. My DL1 still isn't reading the data though, and I suspect that the CAN cable and the DL1 Mk2 both need flashing with the latest firmware. My S80 is configu...

Turby wrote:Let hope he doesn't get run over whilst on holiday!

One suspects that it must have been a very big truck - no one has gotten back to me yet.

Easier than I thought. Wire the supplied RT CAN cable directly to the S80 CAN 'hi' and 'low' wires, and plug it all together. Simples

Two reasons, firstly so that we can inform people of when the new software is released and what new upgrades are available. The second reason is the future software versions may be chargeable, so when hardware is purchased you will get free upgrades for a year or so and then there will be a small y...

No direct internet access, as I'm sat behind a proxy server, the latest v8.2 fails to register on the internet.

Selecting "30 day trial" also fails, with a message saying its a 7 day trial, and then all the menus bar Help are disabled, so I still cant use the software.

Scuppered

'sok. I've downloaded v8 and it appears to come with a bit more video software than my v7 did. Just waiting to register it.

Yes, just checked, it is the CANBUS cable that I bought in May 2010 I'm not sure if the CANBUS connects in to the D-type on the ECU, or if I need to wire it in to the pins on the ECU connector. IIRC I've run a pair of wires out from the ECU, and I think these are the ones that provide the CANBUS sig...

My video is in MPG format, but the Analysis software only supports "RT format video files".

How do I convert in to RT format?

I bought a CANBUS ECU cable harness several years ago to work with my DTA S80, finished the car this year, and now have my Dash3Lite connected to the DL1 for GPS speed. Ideally I'd like the DL1 to read the CAN data from the S80, which is the reason why I bought the cable (but not yet connected it du...

Is the offer still open as I'm there on July 16th for my first visit.

Doh!

I had the Track window reduced in size, and it had obscured the Interactive selection. Sorted now.

Tnx

Single RUN loaded from my fastest Aintree run on Saturday, in track map, I cannot place any track markers. All three Marker icons are grayed out. Do I need to enable anything to allow me to place track markers?

TIA
Graham