I have just updated to the latest V6 firmware. Took me 3 times before the reflash worked on my new HP desktop. I'm now at the stage where after powering the DL1 won't get into a state ready to log
Power light - always on
GPS lock - flashes once then quickly a number of times as expected
Status - always on
Logging - always on
Any ideas ?
DL1 reflash
Re: DL1 reflash
Turby wrote:I have just updated to the latest V6 firmware. Took me 3 times before the reflash worked on my new HP desktop. I'm now at the stage where after powering the DL1 won't get into a state ready to log
Power light - always on
GPS lock - flashes once then quickly a number of times as expected
Status - always on
Logging - always on
Any ideas ?
Similar problem here, after reflashing my DL1.
The unit will log non-stop now and the files created are corrupted. Can't open or copy them.
I had a newly formated memory card with no setup.bin file. I'll test again tonight with a new setup file.
Hi,
After reflashing with the latest firmware you will need to put a setup.bin file on the card, otherwise the logger will most likely start or stop logging of it's own free will. This is because the set up parameters are new to the new firmware and don't have a default value so they need setting.
Martin
After reflashing with the latest firmware you will need to put a setup.bin file on the card, otherwise the logger will most likely start or stop logging of it's own free will. This is because the set up parameters are new to the new firmware and don't have a default value so they need setting.
Martin
______________________________
Posted by Race Technology Support
Posted by Race Technology Support
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 17 guests