Logging Dash 2 Analogue Input to DL1

[Jeremy Billiel]

Can you log Dash 2 Analogue inputs via the serial cable to the DL1? I can't seem to find anything that explains this as possible. Thanks in advance!

Jeremy

[jlucas]

Yes.

Decode incoming serial stream has to be checking in the DL1 config. It shows up as Analog channels 17-20.

Did you loose my phone number?

[sventen]

Are there more information from the DASH that shows up as analogue inputs or does everything has to be configured with an .dll?

Do you know if it´s the same for the DL2?

Martin

[Support]

Hi,
You don't need to configure anything with a .dll. You will get the four analogue channels, and the RPM value (if available). It works exactly the same on a DL1 as it does on a DL2.

Martin