Hello,
I've been using a DL1 with a Kingston 128Mo CF card since August 2004.
My DL1 had worked well with this card during more than one year.
Now, it is impossible to log more than approximately 16 Mo (50 minutes) :
- When the card is formated (empty), the DL1 logs properly,
- After 50 minutes logging, the DL1 stops logging,
- The "Status" light is still flashing,
- But it's impossible to resume logging : When I press the Start/Stop button, the "logging" light comes on only a tenth of a second, the logging starts and stops immediately, and a 0 Ko file is created.
- Then, the only way to make it log again is to format again the CF card on my PC.
For information :
- My DL1 is one of the firsts released (08/2004), and I've never reflashed it,
- I've tried with another CF card and the same problem occurs.
- The CF cards I use support 2.5 Mo/sec writting rate.
Thanks for your help,
Jean-Claude
Impossible to log more than 16 Mo (50 minutes)
Return to “General support questions”
Who is online
Users browsing this forum: No registered users and 27 guests