strange V values in dl1

enduranceracing.dk
Posts: 14
Joined: Thu May 01, 2008 9:57 pm

strange V values in dl1

Postby enduranceracing.dk » Mon Sep 01, 2008 6:31 pm

I get strange volt readings in the Dl1 analoge channels.

In the values table it says the following

gear sensor min:0.3 max 61.8
primairy throttle sensor min:0 max: 59.1
secondary throttle sensor min:0 max: 50

all these sensors have a output voltage between 0 and 5 volt

I read the same values in both the analyse and monitor program.

I've removed the old version of the software and installed version 7.3.7, this didn't help

Does anybody knows what happens?

logger info:
. Firmware version 13-6. Data logged on 30/08/2008 @ 14:06. Logging started by button press. Logging stopped by button press.Logger serial number: 2953. Run Contains 341555 individual data samples, and 330 data formatting errors.

Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 42 guests