Page 1 of 1

*SOLVED* Start logging from Dash4 Pro not working

Posted: Mon Mar 07, 2016 6:54 pm
by Emagine
I've just put a new configuration on my Dash4Pro and its done a bootloader update at the same time.

I've re-programmed the "set" button to become the "Start/Stop logging" function using the Dash4Pro menus.

When I press the Set button, it says, "request to start logging" - "Request failed - timed out"
And yet it if press the logging button on the DL1 itself it starts and stops logging.

Any ideas what could be wrong?

It had worked with previous configurations I've uploaded to the Dash4Pro and then re-programming the buttons.

Posted: Wed Mar 09, 2016 12:15 pm
by Emagine
Just to update this topic.

I've now solved the issue. Having spoken to Sam at RT turns out I needed to update the firmware on the DL1.

I now have a working stop / start logging button on the Dash4Pro.

Basically with the updated bootloader on the Dash4Pro it needed the DL1 to be on the latest firmware version for compatibility.

Nice easy fix.