DL1 running 2 x displays ?

phil91
Posts: 4
Joined: Sat Aug 04, 2018 9:53 am

DL1 running 2 x displays ?

Postby phil91 » Mon Sep 10, 2018 10:09 am

hi all, i was wondering about the DL1 logger being about to output display data to a Dash2 display (navi side) and a Dash4 on the driver side.
I was going to power the Dash4 'power' from the vehicle rather than draw more current from the DL1 unit to power the 2nd display, but wondering if anyone has done this and if so did they have any issues.

my plan was to simply parallel up the data lines from the RS232 output and feed to both displays

Support
Posts: 399
Joined: Mon Nov 21, 2005 4:09 pm

Re: DL1 running 2 x displays ?

Postby Support » Wed Oct 03, 2018 2:52 pm

Hello,

Check this out - http://www.race-technology.com/gb/racin ... tter-cable.

Support (D)
______________________________
Posted by Race Technology Support


Return to “General support questions”

Who is online

Users browsing this forum: No registered users and 41 guests