DL1 + lambda logging..problem?
Posted: Mon Apr 18, 2011 10:37 am
hello there
we use (to fully satisfaction) a DL1-MK2 datalogger.
we use the logger on a racing motorcycle..
i have some questions about datalogging the air fuel rates..
i did a search on the forum but i cannot find the answer for our problem..
we seem to have a problem with connecting the lambda sensor to the logger or something else is wrong.
we use the standard racetechnology bosch lambda.
i'm relative new to this kind of stuff so please explain to me in simple words:
my questions:
1: we have the Lambda connected to analoque 2. is this allright? possible
2: i did read somewhere that the lamda needs a 0-5v supply..is that correct?
3: is het correct that the analoque's on DL1 are 0-5v but on the DL1 MK2 are 0-12v?
so..in general..
could some one please explain to me how to connect the lambda sensor to the DL1 MK2 logger? which "ports" do we need to use..??
and then...
if the lambda is connected...how do i configurates it in the "variable" manager"? at the moment with a non functional lambda on analoque 2 i cannot select "lambda" in the variable manager...
do i understand correctly that the value must be volts?
if so..i need to fill in a custom formula? could someone give me the correct formula?
a lot of questions...i know..
sorry for that but we need the thing "working" as we have a tracktest coming friday
thanks for every answer that can help us
edit: aditional info:
we just use the logger and do not use the dash..we race a classic endurance bike and are not permitted to use a digi dash
our bike has not an ECU..just "igintion and carbs"
best regards from the Netherlands
stefan
we use (to fully satisfaction) a DL1-MK2 datalogger.
we use the logger on a racing motorcycle..
i have some questions about datalogging the air fuel rates..
i did a search on the forum but i cannot find the answer for our problem..
we seem to have a problem with connecting the lambda sensor to the logger or something else is wrong.
we use the standard racetechnology bosch lambda.
i'm relative new to this kind of stuff so please explain to me in simple words:
my questions:
1: we have the Lambda connected to analoque 2. is this allright? possible
2: i did read somewhere that the lamda needs a 0-5v supply..is that correct?
3: is het correct that the analoque's on DL1 are 0-5v but on the DL1 MK2 are 0-12v?
so..in general..
could some one please explain to me how to connect the lambda sensor to the DL1 MK2 logger? which "ports" do we need to use..??
and then...
if the lambda is connected...how do i configurates it in the "variable" manager"? at the moment with a non functional lambda on analoque 2 i cannot select "lambda" in the variable manager...
do i understand correctly that the value must be volts?
if so..i need to fill in a custom formula? could someone give me the correct formula?
a lot of questions...i know..
sorry for that but we need the thing "working" as we have a tracktest coming friday
thanks for every answer that can help us
edit: aditional info:
we just use the logger and do not use the dash..we race a classic endurance bike and are not permitted to use a digi dash
our bike has not an ECU..just "igintion and carbs"
best regards from the Netherlands
stefan