Increase voltage of frequency input?
Posted: Mon Aug 15, 2011 8:37 pm
KnowledgeBase specs that DL1 frequency inputs require <1v low and >4v high.
I have a sensor which puts out 0v low and 2.5-3.0v high.
Is it possible to make this sensor work with the DL1, and if so, how?
Any help would be greatly appreciated!
I have a sensor which puts out 0v low and 2.5-3.0v high.
Is it possible to make this sensor work with the DL1, and if so, how?
Any help would be greatly appreciated!