ECU interface - ECU Specific Interfaces (Pre-programmed)

ECUint

What is the ECU interface?

The Race Technology ECU interface is a small in-line module for use with any combination of our data loggers and display to allow data from your engine management system to be displayed and recorded.

Who is the ECU interface designed for?

The ECU interface is designed for anyone wishing to read vehicle or drive train sensor data directly from their ECU, without the need for additional sensors. Common parameters such as engine speed, coolant temperature, throttle position, etc, are normally available from the ECU, so no additional sensors would be required if using the ECU interface. This leaves the analogue input channels on your data logger free for connection to more specialised sensors, not normally monitored by your ECU (eg: suspension travel). ECUs are being added to the compatibility list all the time. Please contact Race Technology to confirm compatibility with your ECU.

Key Features

  • Compatible with Race Technology displays and data loggers as stand alone units, or as part of a data logger and display system
  • CAN and serial models available, compatible with a wide range of ECUs
  • Receive data from existing vehicle sensors via your ECU - no need to add additional sensors for data logging
  • All channels from the ECU are in addition to the channels already provided with the Race Technology data logger/display
  • Upgradeable firmware. Both the CAN and serial interfaces are flash upgradeable with firmware updates
  • Inline electronics encased in a tough injection moulded case
  • Supplied with cables, instruction manual and comprehensive software CD

Compatible ECUs

The interface is compatible with a wide range of aftermarket ECUs.  It is generally not possible to use this interface with a vehicle manufacturer's original equipment ECU because these units do not normally have data output.  If you wish to read data from an original equipment ECU not listed on our Production Interfaces page please refer to our CAN and Serial OBD-II interfaces.

A list of compatible ECUs follows:
       
For more detailed information on compatible firmware versions and the available channels please consult our knowledge base by clicking the relevant ECU.
When ordering an interface please be sure to include your contact details with the order, so we may contact you to confirm the exact model required.  Alternatively please contact Race Technology for the very latest compatibility list.

Adaptronic Interface
Comments
Adaptronic Serial Firmware version 12 onwards outputs compatible data
AEM Interface Comments
AEM Serial All AEM ECUs except #30-6905 EMS-4
AEM Infinity CAN  
AEM Series 2 CAN  
Autronic Interface Comments
SM2 v1.91/1.92/1.94/1.99 Serial  
SM2 v1.93 and 1.95 Serial  
SM3 v1.09 and SM4 v1.09 Serial  
SM4 up to v1.07 Serial  
SM4 v1.08 Serial  
SMC v1.91/1.92/1.99 Serial  
Bosch Interface Comments
MS4 CAN  
BMW Interface Comments
BMW Z4 (e85) 2003 – 2008 CAN  
Canems Interface Comments
Canems Serial Only available on units 1308 or later
DTA Interface Comments
E48
Serial  
P8 Pro
Serial  
S40
Serial ECU equipped with CAN and serial interface
S60
Serial ECU equipped with CAN and serial interface
S80
Serial ECU equipped with CAN and serial interface
S40
CAN ECU equipped with CAN and serial interface
S60
CAN ECU equipped with CAN and serial interface
S80
CAN ECU equipped with CAN and serial interface
e-Race Interface Comments
e-Race CAN  
ECU Master Interface Comments
EMU Serial V1.023 - No interface required, ECU outputs RT data
EMU Black CAN  
EFI Interface Comments
EURO 4 CAN  
EURO 6 CAN  
EURO 8 CAN  
EURO 12 CAN  
Electromotive Interface Comments
TEC GT CAN  
TEC S CAN  
TEC 3
Serial Firmware version WT303T3 or later on ECU
TEC 3R
Serial Firmware version WT303T3 or later on ECU
Emerald Interface Comments
K3
Serial ECU equipped with CAN and serial interface
K6
Serial ECU equipped with CAN and serial interface
M3D
Serial  
K3
CAN ECU equipped with CAN and serial interface
K6
CAN ECU equipped with CAN and serial interface
EMS Interface Comments
Stinger
Serial  
8860
Serial  
6860 Serial  
4860 Serial  
Gems Interface Comments
EM36 CAN  
Gems EVO 9 CAN  
Gems EVO X CAN  
Haltech Interface Comments
PS1000 V1
CAN Version 2 protocol (firmware 1.10 onwards)
PS1000 V2
CAN Version 2 protocol (firmware 1.10 onwards)
HKS Interface Comments
F-CON V Pro V3.0 and 3.1 Serial  
F-CON V Pro V3.2 and 3.3 Serial  
Hondata Interface Comments
K-Series Serial Only compatible with the PRB ECU model
K4Pro CAN  
Hydra Interface Comments
ECU2.6 Serial  
Ignijet Interface Comments
Ignijet CAN 2009 onwards
KMS Interface Comments
MD35 CAN  
MP25 Serial  
Life Racing Interface Comments
F88 CAN  
Link
Interface
Comments
G4 CAN  
G4 Serial  
MME Interface
Comments
ECU481 Serial  
MaxxECU
Interface
Comments
Maxx CAN  
MBE
Interface
Comments
MBE 941 Serial  
MBE 967 Serial  
MBE 9A4
CAN  
MBE 992
CAN  
Megasquirt
Interface
Comments
MS2 Serial MS2 3.2.5/and 3.3.2 and above. MS3 1.3.1and above
MS2  CAN  
Motec
Interface
Comments
M1 Series CAN  
M4
Serial  
M48 Serial  
M400 Serial ECU equipped with CAN and serial interface
M600
Serial ECU equipped with CAN and serial interface
M800
Serial ECU equipped with CAN and serial interface
M400
CAN ECU equipped with CAN and serial interface
M600
CAN ECU equipped with CAN and serial interface
M800
CAN ECU equipped with CAN and serial interface
M84 Serial  
Nira Interface
Comments
I3+ Serial  
I7 Street CAN  
Omex
interface
Comments
Omex 100
Serial Requires ECU firmware G1.31
Omex 500
Serial Requires ECU firmware G1.31
Omex 600
Serial 600 ECU must be v0.70D or later
Omex 710 v0.7 Serial 710 ECU must be v0.70C or later
Omex 710 v0.89
Serial version 0.89 firmware
Pectel
Interface
Comments
Pectel Serial  
SIMTEC Interface Comments
SIMTEK CAN  
Sybele
Interface
Comments
Challenger 4
CAN  
Challenger 5 CAN  
Challenger 6
CAN  
Commander 44
CAN  
Commander 66
CAN  
Commander 6D
CAN  
Specialist Components
Interface
Comments
Tornado
CAN  
Typhoon
CAN  
Syvecs
Interface
Comments
Syvecs CAN  
Tatech
Interface
Comments
T32 Serial  
V0.5 Serial  
Vems
Interface
Comments
V3 Serial  
Vi-Pec
Interface
Comments
V44
CAN  
V88
CAN  
V44
Serial ECU firmware v4.2.0 onwards
V88
Serial ECU firmware v4.2.0 onwards
i-series Serial ECU firmware v4.2.0 onwards
Main Product (GBP 150.00)
Available Variations
ECU Interface - Haltech V2 (GBP 150.00)
ECU Interface - HYDRA SERIAL (GBP 150.00)
ECU Interface - Adaptronic e420c SERIAL (GBP 150.00)
ECU Interface - AEM ECU (GBP 150.00)
ECU Interface - AEM Infinity (GBP 150.00)
ECU Interface - AEM Series 2 (GBP 150.00)
ECU Interface - Autronic SM2 v1.91, 1.92, 1.94, 1.99 (GBP 150.00)
ECU Interface - Autronic SM2 v1.93 and v1.95 (GBP 150.00)
ECU Interface - Autronic SM4 up to v1.07 (GBP 150.00)
ECU Interface - Autronic SM4 v1.08 (GBP 150.00)
ECU Interface - Autronic SM4 v1.09 (GBP 150.00)
ECU Interface - Autronic SMC v1.91, 1.92, 1.99 (GBP 150.00)
ECU Interface - BMW PT6 (GBP 150.00)
ECU Interface - BOSCH MS4 (GBP 150.00)
ECU Interface - Canems ECU (GBP 150.00)
ECU Interface - DTA E48 and P8 PRO SERIAL (GBP 150.00)
ECU Interface - DTA S40/S60/S80 (GBP 150.00)
ECU Interface - DTA S40PRO S60PRO S80PRO CAN (GBP 150.00)
ECU Interface - e-RACE CAN (GBP 150.00)
ECU Interface - ECU MASTER EMU v1.023 (GBP 150.00)
ECU Interface - EFI Euro 12 CAN (GBP 150.00)
ECU Interface - EFI Euro 4 CAN (GBP 150.00)
ECU Interface - EFI Euro 6 CAN (GBP 150.00)
ECU Interface - Electromotive TEC GT CAN (GBP 150.00)
ECU Interface - Electromotive Tec S CAN (GBP 150.00)
ECU Interface - Electromotive TEC3 and TEC3r CAN (GBP 150.00)
ECU Interface - EMERALD K3 and K6 ECUs SERIAL (GBP 150.00)
ECU Interface - EMERALD K3-CAN (GBP 150.00)
ECU Interface - EMERALD M3D ECU (GBP 150.00)
ECU Interface - EMS Stinger and 8860 ECU (GBP 150.00)
ECU Interface - EMSIS 80 AHRS (GBP 150.00)
ECU Interface - GEMS EM36 (GBP 150.00)
ECU Interface - Gems EVo X CAN (GBP 150.00)
ECU Interface - GEMS EVO9 (GBP 150.00)
ECU Interface - Haltech V1 (GBP 150.00)
ECU Interface - HKS F-CON V Pro V3.0 and 3.1 (GBP 150.00)
ECU Interface - HKS F-CON V Pro V3.2 and 3.3 (GBP 150.00)
ECU Interface - HONDATA K-SERIES ECU (GBP 150.00)
ECU Interface - HONDATA K4Pro (GBP 150.00)
ECU Interface - HYDRA 2.60 ECU (GBP 150.00)
ECU Interface - Ignijet 2007 (GBP 150.00)
ECU Interface - KMS KTM x bow CAN (GBP 150.00)
ECU Interface - KMS MD35 CAN (GBP 150.00)
ECU Interface - KMS MP25 SERIAL (GBP 150.00)
ECU Interface - Life Racing F88 CAN (GBP 150.00)
ECU Interface - Maf-Map-Engineering ECU481 (GBP 150.00)
ECU Interface - MaxxECU (GBP 150.00)
ECU Interface - MBE 941 (GBP 150.00)
ECU Interface - MBE 967 (GBP 150.00)
ECU Interface - MBE 9A4 and MBE 992 CAN (GBP 150.00)
ECU Interface - Megasquirt MS2 CAN interface (GBP 150.00)
ECU Interface - Megasquirt MS2 Serial Interface (GBP 150.00)
ECU Interface - Motec M1 Series CAN ECU (GBP 150.00)
ECU Interface - Motec M4 and M48 SERIAL ECU (GBP 150.00)
ECU Interface - Motec M400 M600 M800 CAN (GBP 150.00)
ECU Interface - Motec M400 M600 M800 SERIAL (GBP 150.00)
ECU Interface - Motec M84 SERIAL (GBP 150.00)
ECU Interface - Nira I3+ SERIAL (GBP 150.00)
ECU Interface - Nira I7 STREET (GBP 150.00)
ECU Interface - OMEX 100 and 500 ECUs (GBP 150.00)
ECU Interface - OMEX600 and 710 V0.70 SERIAL (GBP 150.00)
ECU Interface - OMEX710 V0.89 (GBP 150.00)
ECU Interface - PECTEL (Stack) ECU (GBP 150.00)
ECU Interface - Skynam Sybele (GBP 150.00)
ECU Interface - Specialist components Tornado/Typhoon (GBP 150.00)
ECU Interface - Syvecs CAN (GBP 150.00)
ECU Interface - Tatech T32 SERIAL (GBP 150.00)
ECU Interface - Tatech v0.5 (GBP 150.00)
ECU Interface - VEMS ECU (GBP 150.00)
ECU Interface - ViPEC CAN (GBP 150.00)
ECU Interface - ViPEC V44, V88 and Link G4 SERIAL (GBP 150.00)
ECU Interface - Link G4+ CAN (GBP 150.00)
ECU Interface - ECU Master EMU Black (GBP 150.00)
ECU Interface - BMW Z4 (e85) 2003 – 2008 (GBP 150.00)
ECU Interface - EFI Europe – Euro8 (GBP 150.00)

* - Main product required.

Note: all prices are exclusive of VAT at 20.0%.