Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

Operation / ContinuousMode

Continuous Timing

When timing is started the display will show the current g force (longitudinal then lateral), the current speed, distance travelled, power, and a GPS lock score between 0 and 1:

0.00g 0.00g 0.0mph
0ft 0hp 0.83

During this time, the data will be written to the compact flash card if there is one present. By pressing the up arrows during this mode, the following screens can be cycled through:

All screens have the same data on the top line of the screen, but have a modified bottom line.

Longitudinal acceleration bar graph with maximum value:

0.00g 0.00g 0.0mph
Long |||||||||||||| |

Lateral acceleration bar graph with maximum value:

0.00g 0.00g 0.0mph
Lat |||||||||||||| |

Power bar graph with maximum and actual value

0.00g 0.00g 0.0mph
|||||||||||||| | 54hp

Auto scaling speed bar graph with maximum marker

0.00g 0.00g 0.0mph
Speed |||||||||||| |

All maximum values on the bar graphs are reset when the mode is changed.

Pressing the select button will finish the continuous timing mode.

Pressing the down button will add a lap marker to the current run (only if there is a CF card present)

Page last modified on September 11, 2007, at 05:40 PM