Hi all, can anyone give me a hint. I cannot get a dash4pro to reflash. It is connected to a DL1 mk3. Have had this set up before and bought a car with this set up. I've updated the license etc
But when I put an sd card in with the relevant hex file nothing happens? Tried cmg....
Any advice greatly appreciated
Kind regards James
Dash4pro won't reflash
Re: Dash4pro won't reflash
Sorted it now works. Next problem logger is getting info from ecu via can but nothing on the dash4pro all values zero except if for g force and time data? Anyone help me?
Re: Dash4pro won't reflash
The question is too general to be able to answer, but I can give some guidance:
- on the D4P menu there is an option under 7.2 to view the incoming data channels directly, that is a good/simple first check:
http://www.race-technology.com/wiki/ind ... uStructure
- if you can't see any data there, the next step is to check the output of the ECU adapter on the PC using the live monitor software
http://www.race-technology.com/wiki/ind ... are/ECU-PC
http://www.race-technology.com/wiki/ind ... iveMonitor
- if nothing is coming out the ECU adapter, then check the connections to the ECU and that the ECU is configured. Details for all ECUs are listed here:
http://www.race-technology.com/wiki/ind ... ce/ECUType
Hopefully that helps! Support (A)
- on the D4P menu there is an option under 7.2 to view the incoming data channels directly, that is a good/simple first check:
http://www.race-technology.com/wiki/ind ... uStructure
- if you can't see any data there, the next step is to check the output of the ECU adapter on the PC using the live monitor software
http://www.race-technology.com/wiki/ind ... are/ECU-PC
http://www.race-technology.com/wiki/ind ... iveMonitor
- if nothing is coming out the ECU adapter, then check the connections to the ECU and that the ECU is configured. Details for all ECUs are listed here:
http://www.race-technology.com/wiki/ind ... ce/ECUType
Hopefully that helps! Support (A)
Re: Dash4pro won't reflash
Currently Dan in your team is looking it to this for me as have not manned to get any further forward sadly.
Re: Dash4pro won't reflash
All done! Works a treat now thanks to Dan for all the help! Looks amazing too so neat with can wring
Return to “General software support”
Who is online
Users browsing this forum: No registered users and 18 guests