Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

Operation / ChangingSpeedAndDistanceUnits

Changing the speed / distance units

Speed and distance are displayed in mph/miles by default. To change this to kph/km select “Speedo RPM Gear” from the main menu, then press the SELECT button until “Speed units” is displayed. Use the UP/DOWN buttons select the desired display units, then press SELECT to save the new setting and return to normal display mode.

NOTE: Although it is possible to select km or miles for the odometer and trip displays, the calibration for the wheel speed input is always in pulses per mile. If calibration data for external sensors is quoted in pulses per km this must be converted to pulses per mile to be entered as a calibration factor for the DASH2 in the configuration software.

Page last modified on April 24, 2008, at 03:59 PM