Restarting after powering off or moving the antenna
If power is interrupted to the RTK BASE base station, on restarting a new position will be obtained. If this is determined to be within 5m of the previously stored location, and a new survey is not yet due, then it will be assumed that the location is the same as before and corrections will start very quickly.
If the antenna is moved for some reason and a new survey needs to be forced, this can be done through the webs interface in the Account section.
Clicking the Reset and clear surveyed location will force a new update to take place. Note that this will mean that corrections will not be available for around 30 hours.