Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website
  1. Ordered list

ECUInterface / BeforeUsingTheUnit

Before You Begin

In order for the DL1 or DL2 data logger and DASH1 or DASH2 display to function correctly with the ECU serial interface it is first necessary to ensure that all units are using the most up to date version of their respective firmware. Display units and data loggers shipped with the ECU serial interface will already have the correct firmware version installed, but if you have received the ECU serial interface separately to use with your existing data logger and/or display unit you will need to update the firmware on these units. Please contact Race Technology to obtain the latest firmware upgrades for the data loggers and display units.

Reflashing procedures for these units are avaiable in the documentation supplied along with the units. If you are in any doubt about reflashing procedure, please contact Race Technology before proceeding.

Page last modified on September 15, 2008, at 12:29 PM