Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

DASH2PROOperation / ResettingMonitoredValue

Resetting a monitored value to zero for change measurement

Whilst most values displayed on the DASH2 PRO will show an absolute reading, such as the water temperature or quantity of fuel in the tank, there are times when it would be useful to monitor changes in value, such as how much fuel has been used to cover a certain distance. To achieve this, the DASH2 PRO can be configured to reset a number of channels to zero on a single button press. There are two steps in this process: Firstly selecting which channels to reset and then secondly setting one of the buttons to perform the reset function.

To select which channel to reset, follow the instructions in the configuration software here.

To set up a button to perform the reset function see “Programming soft buttons” and set the button to either “Reset Values”. Whenever this button is pressed it will reset the selected channels to zero.

Page last modified on January 22, 2013, at 05:52 PM