Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website
  1. Ordered list

UsingDASH4PRO2ConfigurationSoftware / SendingTheConfigurationToTheDASH4PRO2

Sending the configuration to DASH4PRO using a PC

Note: You will require a special connector to connect the DASH4PRO to the PC (not shipped with the DASH4PRO). For more information please contact Race Technology. To configure a DASH4PRO you can use a DL1 instead. Please refer section on Sending Configuration to the DASH4PRO for more information.

Once you are happy with the configuration that you have created, it must be transferred to the display unit. To do this, you must first connect the device to the COM port of your computer. Make sure to switch off the device whilst connecting.

When you are ready, select the Send Configuration to Device option from either the Menubar (File -> Configure the DASH4PRO) or from the Toolbar. The following window will then appear:


Select the connected port and press Send File button to send the current configuration file.

For more information on Configuring the DASH4PRO unit, please refer the Configuring the DASH4PRO Unit section in the DASH4PRO manual.

Page last modified on December 03, 2014, at 10:09 AM