Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

ECUDecodeLicense / ElectromotiveTec3ECUs

Electromotive Tec3 ECUs

The electromotive TEC3 and TEC3r ECU interfaces require firmware version WT303T3 or later to be installed on the ECU. The serial communication must be set to 38400 baud on the ECU. The following data is available from the interfaces:

ECU Name Race Technology message Race Technology Default name Race Technology VAR number Resolution
RPM Engine RPM RPM VAR_0010 25 RPM
Battery Voltage Misc 3 Battery Voltage VAR_4002 0.01 V
Air To Fuel Ratio Misc 1 Lambda 1 VAR_4000 0.1 Lambda
Water Temperature Temperature 8 Water Temperature VAR_1007 0.1°C
Intake Air Temperature Temperature 1 Temperature 1 VAR_1000 0.1°C
Intake Manifold Pressure Pressure 5 Boost Pressure VAR_3504 1mBar
Fuel Inj 1 Pulse Width Percent Aux 6 Fuel Inj 1 PW VAR_2005 0.1%
Throttle Position Aux 1 Throttle Position VAR_2000 0.1%
Ignition Angle Angle 2 Ignition Angle VAR_3001 0.1°
Primary PW Measured Time 1 Fuel Inj 1 PW on VAR_2500 µs
Staged PW Measured Time 2 Fuel Inj 2 PW on VAR_2501 µs
User PW Measured Time 3 Fuel Inj 3 PW on VAR_2502 µs
Page last modified on October 01, 2014, at 09:11 AM