Logging status display
The status of an attached logger can be displayed on the DASH2, with a tick mark in the top right hand corner, as shown in Figure 1. It is also possible to set the left hand shift light as a secondary, more highly visible logger status indicator. This is selected using the “Status display” option – item 2 in the DASH2 menu system (see Figure 4). When this mode is enabled, the left-most shift light operates as a logging status indicator. The remaining five shift lights operate as normal. In the top left corner of the display (see Figure 1), the DASH2 also has a binary symbol to indicate that serial communications are being received when the unit is used with a Race Technology data logger or other device, such as a PC.