Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

CANDataFormat / DisplayInfoMessages

RT_Display_Info: Display Information

RT_Display_Info: 158, 0 (0x9E0020 + unit ID) (0x780)

This message contains sufficient information to allow informational, warning and error messages to be displayed on a CAN-enabled dashboard for real-time viewing.

Byte 0: Priority
Byte 1: Display time
Byte 2: Useful time
Byte 3: Source hardware type
Bytes 4-5: Source serial number
Byte 6: Message code
Byte 7: Unused

Priority:

0 = Informational
2 = Warning
4 = Operational error
6 = Hardware failure

Display time:

Unsigned byte, possible values 0-255.
Units: Seconds
Suggested time duration of message display. Value 0 implies until acknowledged by user, values 1-255 are duration in seconds.

Useful time:

Unsigned byte, possible values 0-255.
Units: Seconds
Time from sending message until this message is no longer useful/relevant. Value 0 implies indefinitely relevant.

Source hardware type:

This specifies the type of Race Technology hardware that generated the message.
0x00 = Unknown
0x01 = DL1
0x02 = DASH2
0x03 = DASH3
0x04 = VIDEO4
0x05 = DL2
0x06 = SPEEDBOX
0x07 = DASH4PRO
0x08 = DL1 SPORT
0x09 = ANALOG8
0x0A = POWER PACK 6
0x0B = THERMO12
0x0C = ANALOG16
0x0D = RTLive
0x0E = GPS2
0x0F = VIDEO4HD
0x10 = RTK Base Station
0x11 = SPEEDSENSOR10
0x21 = DASH2 PRO
Page last modified on January 17, 2019, at 12:54 PM