Setting Warning display time
The amount of time that warning messages are displayed on the screen can be configured from the DASH4PRO FD menu system.
1. Enter menu display mode by pressing the MENU button.
2. Use the UP/DOWN buttons to display 3 Warnings display in the main menu and press SET.
3. Then use the UP/DOWN buttons to select the 3.1 Warning time and press SET.
4. Use the UP/DOWN buttons to move the on screen slider and select the desired display duration. The minimum adjustable time duration is 1s while the maximum level is 99 seconds. If you attempt to set the duration to greater than 99s, the adjustable time will appear as “On” (which means that the screen will be permanently on).
5. Press SET to save the new setting. Display will be return back to the normal display mode.