Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

Operation-NEW / ChangingDisplayedInformation

Changing displayed information

There are five user-configurable screens of data that can be displayed on the DASH2. The data to display on each screen is selected using the DASH2 configuration program on the PC. Once the screens are configured, the programmable buttons can be used to select which screen to display. This enables toggling through the five screens of data. To set up a button to do this, see the section Programming soft buttons and assign the “Next screen” or “Previous screen” functions, as shown in Figure 4. When changing between screens, the screen number is briefly indicated at the bottom of the display.

Page last modified on October 06, 2016, at 01:49 PM