Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

InstallingTheSystem / Power

Power

The Peli case requires a DC power supply, which must be in the range 9 – 15V. This should be connected to the cable loom assembly that is supplied with the system via a fused connection to the vehicle. A 2A fast blow type fuse is recommended. Once connected to the power supply, the system will automatically power up and commence its initialisation routine. The current consumption of the system ranges from approximately 500mA @ 12V to 800mA @ 12V.

Internal battery pack (Optional) 12v 5000 mAh.

Unreliable power supplies are a common source of problems. In the event of any problems, please check the reliability of the power source or try an alternative supply in the first instance. The system may also be powered from an external battery pack. If you require a battery pack, Race Technology keeps a wide selection in stock - please contact us with your requirements. Because of the current supply requirements, only rechargeable batteries should be used. Disposable cells are not suitable.

Page last modified on October 26, 2016, at 11:53 AM