Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

Reflashing / ReflashingTheCANInterface

Reflashing / configuration procedure

Connect the CAN interface to the PC as described in the connections section. Ensure that the power to the unit is turned off. Enter all required configuration settings for your ECU. From the configuration utility click on the Send now button. When prompted to turn the unit on, apply power to the CAN interface and the reflash should finish automatically. When connected to a data logger the CAN interface will be powered from the data logger. When used with a standalone DASH2 the CAN interface should be powered through the supplied power adaptor cable.

Page last modified on October 24, 2007, at 04:45 PM