• Edit
• History
• Print
• Download (.HTML)
• PDF

OperatingTheDASH5PROMenu / ConfiguringTheShiftLights

Configuring the Shift lights

In this page:

• Configuring DASH5PRO shift lights
• Settting shift light brightness (day/night)

Configuring DASH5PRO shift lights

There are six lights on the DASH5PRO and these can be configured to be either red or green lights.

Based on the engine speed, the lights can be illuminated in a number of ways. If required, different RPM can be used in each gear and an alternative set of conditions can be set for low temperature operation based on the value of a second variable. This is particularly useful to keep engine speed down until the engine is properly warmed up.

Performance indicator

This mode shows the current time slip rate as either a bar chart from bottom to top, or as an indicator from the centre outwards. It requires data from a DL1 MK3 or VIDEO4 to operate in this mode.

Barchart based on variable.

Either bottom to top or centre out display of any chosen variable, with user configurable levels at which the LEDs are illuminated.

Settting shift light brightness (day/night)

The brightness of the shift lights can be changed to suit personal preference.

1. Naviage to the menu item 1.6

2. Open the sub menus which allows you adjust the brightness values for Shift lights.

• 1.6.1 - Shift light brightness Day
• 1.6.2 - Shift light brightness Night

3. Adjust the brightness using - or + buttons.

4. Save the setting by clicking "Ok" button.