Call me back | My basket | Checkout | Add to email list

     You are here: Website » Knowledge base

« back to website

RTLive / RestoringBackupFirmware

Reflash the RT LIVE firmware using backup firmware image

If there has been a reflash error due to loss of power etc, then in rare cases it might be needed to restore the unit back to a backup copy of the firmware.

If this is the case then there is a special procedure:

  1. press and hold the front push button for 10 seconds and wait for the for all LEDs to start flashing
  2. Once LEDs start flashing, then release the button
  3. Again press and hold the front push button for 10 seconds and wait for the for all LEDs to start flashing
  4. Once LEDs start flashing, then release the button
  5. The firmware will then be restored to the previous backed-up version

Note that once the firmware is restored, it will try to contact the RT Server to see if newer firmware is available to download. If it is then the firmware will be automatically updated.

Page last modified on April 23, 2018, at 01:10 PM