Taking a copy of existing firmware files (and all other files on the internal drive)
Sometimes it is safe to keep a copy of current VIDEO4 firmware on the PC. Following is a list of steps required to accomplish this task.
1. Take a formatted flash card and place a blank file on it called "COPYBA.CMD"
2. Insert the flash card to VIDEO4 unit, and power it up
3. All the LED indicators on the front panel will light up -> At this moment VIDEO4 starts to copy files
4. After few seconds the Power LED will light up, with the other LEDs off or flashing.
5. Turn the VIDEO4 off and remove the flash card.
6. Review the contents of the flash card by inserting into a USB2 reader connected to a PC
You will notice the firmware files are backed up inside a folder named INTERNAL
(COPYBA.CMD file will be moved to DONE folder if the copy is successful)
7. Keep a backup of the entire folder in your PC for later use
My basket |
Checkout |
Add to email list
Edit
History
Print
Download (.HTML)
PDF